Lynx Smart BMS 1000 (M10) Victron Energy

Lynx Smart BMS 1000 (M10) - BMS for Lithium Smart batteries, 1000 A

Lynx Smart BMS 1000 (M10) is a dedicated Battery Management System for Victron Lithium Smart batteries and part of the modular Lynx distribution system. It integrates a 1,000 A contactor, used as a fallback safety mechanism and as a remote-controllable main switch, as well as a battery monitor and a pre-alarm signal.

Main features:

• Rated current: 1,000 A continuous, 1,200 A for 5 minutes
• System voltages: 12, 24 or 48 V
• Compatible batteries: Victron Lithium Smart
• Pre-charge: built-in circuit for capacitive loads such as inverters
• Charger/load control: DVCC, ATC/ATD contacts, programmable relay
• Connectivity: Bluetooth, VictronConnect, VE.Can, GX devices and VRM

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A and 1000A (both with M10 busbar connections).

The main features are:

• Built-in 500A or 1000A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch.
• Battery monitor, indicating state of charge percentage and more data.
• Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.
• Bluetooth for use with our VictronConnect app, for setup and monitoring, including Instant Readout - key data of the BMS at-a-glance.
• Local and remote monitoring using a Victron GX device, for example the Cerbo GX or Ekrano GX.

The Lynx Smart BMS is part of the modular Lynx Distribution system.

Technical specifications