€33 Tax excluded
SolidSwitch 104 is an electronic switch for DC loads of up to 70 V and 4 A, controlled by a low-power digital signal. The load can be resistive, capacitive or inductive, such as the coil of a high-power contactor. It is not reverse polarity protected and not short-circuit proof.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
SolidSwitch 104 is an electronic switch for DC loads of up to 70 V and 4 A, controlled by a low-power digital signal. The load can be resistive, capacitive or inductive, such as the coil of a high-power contactor. It is not reverse polarity protected and not short-circuit proof.
| Operating voltage range | 8 … 70 V |
|---|---|
| Maximum load current | 4 A |
| Maximum capacitive load (below 15 V) | 1000 µF |
| Maximum capacitive load (15-30 V) | 400 µF |
| Maximum capacitive load (above 30 V) | 50 µF |
| Maximum inductive load (up to 1 A) | 1000 |
| Maximum inductive load (1-2 A) | 200 |
| Maximum inductive load (above 2 A) | 10 |
| Remote input voltage range (off) | ≤ 3 V |
| Remote input voltage range (on) | 3.3 … 70 V |
| Remote input minimum switching current | 30 µA |
| Operating temperature range | -20 … 50 °C |
| Maximum humidity | 95 % |
| Connections | Screw terminals |
| Material | ABS |
| Colour | Matt black with a blue sticker |
| Protection category | IP20 |
| Height | 58 mm |
| Width | 66 mm |
| Depth | 23 mm |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
