Battery management system Victron Energy Lynx Smart BMS 1000 NG (M10), 1000 A

Lynx Smart BMS 1000 NG (M10) - BMS for Lithium NG batteries, 1000 A

Lynx Smart BMS 1000 NG (M10) is a battery management system (BMS) for Victron Lithium NG batteries of 12.8 V, 25.6 V and 51.2 V. It integrates a 1,000 A contactor, a battery monitor and a pre-alarm signal, and manages up to 50 batteries in series and parallel, in 12, 24 or 48 V systems.

Key features:

• Rated current: 1,000 A continuous, 1,200 A for 5 minutes
• System voltages: 12, 24 or 48 V
• Compatible batteries: Victron Lithium NG, up to 50 batteries
• Pre-charge: integrated circuit for capacitive loads, no external device needed
• Charge/load control: DVCC, ATC/ATD contacts, programmable relay
• Connectivity: Bluetooth, VE.Can, NMEA 2000, GX devices and VRM

The Lynx Smart BMS NG is an advanced battery management system designed specifically for Victron Energy Lithium NG batteries (not to be confused with the Lynx Smart BMS, which is for Victron Lithium Battery Smart batteries). This robust BMS ensures uninterrupted performance, optimal safety and efficient monitoring for Lithium NG battery banks, which are available in nominal voltages of 12.8 V, 25.6 V and 51.2 V with different capacities. Available in two sizes - 500 A and 1000 A - the Lynx Smart BMS NG offers a reliable, safe and easy-to-use solution.

Battery systems can be configured in series, in parallel or in a combination of both, supporting 12 V, 24 V and 48 V systems. Each system can accommodate up to 50 batteries, providing up to 192 kWh (12 V) or 384 kWh (24 V/48 V) of energy storage. By paralleling several Lynx Smart BMS units, you can extend the capacity and ensure redundancy.

Key features:

• Built-in 500 A or 1000 A contactor: provides backup protection and allows remotely controlled switching of the main system.
• Battery monitoring: shows the state of charge and other important data for efficient system management.
• Pre-alarm signal: warns before the system shuts down because of low cell voltage.
• Bluetooth connectivity: easily configure, monitor and diagnose the system from our VictronConnect app.
• Local and remote monitoring: compatible with Victron GX devices such as the Cerbo GX, and with the VRM portal for real-time monitoring.
• M10 busbar integration: connects seamlessly to all Lynx M10 products, ensuring smooth integration into the Lynx Distributor system.

The Lynx Smart BMS NG is an integral part of the modular Lynx Distribution system.

Technical specifications