LiFePO4 12,8V/100Ah NG - 12V LiFePO4 battery for external BMS
LiFePO4 12,8V/100Ah NG is a lithium iron phosphate battery module from the NG series for 12 V systems, with read-out of individual cell voltages and temperatures and an IP65 housing for bracket or strap mounting. It works with a Lynx Smart BMS NG, purchased separately, and is intended for energy storage in off-grid, residential and marine systems.
Main features:
- Voltage, capacity, energy: 12.8 V, 100 Ah, 1,280 Wh
- Cycle life: 2,500 at 80% DoD, 5,000 at 50% DoD
- Discharge current: 100 A continuous, 200 A pulse
- Charge current: 100 A continuous
- Required BMS: Lynx Smart BMS NG, purchased separately
- Monitoring and updates: VictronConnect, GX device and VRM, via the BMS
Building upon the success of our Lithium Smart Series, the NG (Next Generation) series incorporates significant enhancements.
Highlights:
- Multiple improvements including added read-out of cell voltages and temperatures;
- Maximum single bank size increased to 385kWh;
- Modules available in 12, 24 and 48V;
- Protection class IP65;
- Bracket mounting and strap mounting.
Tailored for those seeking advanced and reliable energy storage, the Lithium NG series marks a pivotal advancement in our product lineup, ready to meet the demands of tomorrow.
Technical specifications
| Nominal battery voltage | 12.8 V |
|---|
| Nominal battery voltage (class) | 12 |
|---|
| Nominal battery capacity | 100 Ah |
|---|
| Nominal energy | 1280 Wh |
|---|
| Capacity loss | 1 % |
|---|
| Energy loss | 1 % |
|---|
| Efficiency | 92 % |
|---|
| Chemistry | Lithium Iron Phosphate (LiFePO4 or LFP) |
|---|
| Cycle design life at 80 % DoD | 2500 cycles |
|---|
| Cycle design life at 70 % DoD | 3000 cycles |
|---|
| Cycle design life at 50 % DoD | 5000 cycles |
|---|
| Maximum continuous discharge current | 100 A |
|---|
| Maximum pulse discharge current | 200 A |
|---|
| End-of-discharge voltage | 11.2 V |
|---|
| Internal resistance | 2 mΩ |
|---|
| Self-discharge rate | 3 % |
|---|
| Float charge voltage | 13.5 V |
|---|
| Maximum continuous charge current | 100 A |
|---|
| Maximum pulse charge current | 200 A |
|---|
| Storage temperature range | -45 … 70 °C |
|---|
| Maximum humidity | 95 % |
|---|
| Requires external BMS | 1 |
|---|
| BMS included | 0 |
|---|
| BMS | Lynx Smart BMS NG 500A / 1000A (M10 busbars), must be purchased separately |
|---|
| Cell monitoring | Cell voltages and temperatures, battery current |
|---|
| BMS cable | 50 cm male and female cable with M8 circular connector with high-speed digital communication |
|---|
| Alarm function | Pre-alarm contact on BMS |
|---|
| Bluetooth | In the BMS |
|---|
| Maximum number of batteries per BMS | 50 (384kWh per BMS) (Up to 5 BMS-es can be paralleled) |
|---|
| Firmware updates | Battery firmware automatically updated by BMS |
|---|
| Repairable | Yes (cover can be removed with screws) |
|---|
| Battery terminals | M8 threaded inserts |
|---|
| Material | ABS |
|---|
| Colour | Blue (RAL 5012) |
|---|
| Protection category | IP65 |
|---|
| Mounting method | Strap or mounting brackets |
|---|
| Mounting orientation | The lithium battery can be mounted upright and on its side, but not with the battery terminals facing down |
|---|
| Weight | 9 kg |
|---|
| Height | 235 mm |
|---|
| Width | 197 mm |
|---|
| Depth | 160 mm |
|---|
| Safety (cells) | IEC 62619, UL 1973, UL 9540A |
|---|
| Safety (battery) | IEC 62619 (pending), UL 2054 |
|---|
| EMC | EN-IEC 61000-6-2, EN-IEC 61000-6-3 |
|---|
| Automotive standard | ECE R10-6 |
|---|
| Performance standard | IEC 62620 |
|---|