- -20%
€520 Tax excluded
BlueSolar MPPT 250/100-Tr VE.Can is an MPPT solar charge controller for 12, 24 or 48 V batteries, with automatic selection, a charge current of 100 A, a maximum PV open-circuit voltage of 250 V and a maximum efficiency of 99 %. The rated PV power is 1450 W at 12 V, 2900 W at 24 V and 5800 W at 48 V, and communication is via VE.Direct and VE.Can.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
BlueSolar MPPT 250/100-Tr VE.Can is a solar charge controller with maximum power point tracking (MPPT) for 12, 24 or 48 V batteries with automatic selection, with a charge current of 100 A and a maximum PV open-circuit voltage of 250 V. It has a VE.Direct port and VE.Can ports.
MPPT technology tracks the maximum power point extremely fast by constantly monitoring the voltage and current of the solar panels. Its advantage is most noticeable when the sky is partly cloudy and the light intensity changes constantly.
The charge algorithm is fully programmable and includes eight preprogrammed algorithms, selectable with a rotary switch. The internal temperature sensor compensates the absorption and float voltage according to temperature. Protections include over-temperature, with power reduction when the temperature is high, short circuit, PV reverse polarity and PV reverse current.
With a VE.Direct to Bluetooth Smart dongle attached, the controller can be configured and monitored remotely through VictronConnect on iOS and Android devices, including battery status and solar panel power.
The PV connection is made with 35 mm² screw terminals, and the battery connection with 35 mm² screw terminals. The maximum PV short-circuit current is 70 A. The dimensions are 216 x 295 x 103 mm (height x width x depth) and the weight is 4.5 kg. Up to 25 units can operate in synchronised parallel.
| Battery voltage (automatic selection) | 12V / 24V / 48V automatic selection (a software tool is required to select 36V) |
|---|---|
| Rated charge current | 100 A |
| Rated PV power (12 V) | 1450 W |
| Rated PV power (24 V) | 2900 W |
| Rated PV power (36 V) | 4350 W |
| Rated PV power (48 V) | 5800 W |
| Absorption charge voltage | 14.4V / 28.8V / 57.6V (adjustable) |
| Float charge voltage | 13.8V / 27.6V / 55.2V (adjustable) |
| Charge algorithm | Adaptive, multi-stage (adjustable) |
| Temperature sensor | Internal |
| Temperature compensation (12 V) | -16 mV/°C |
| Temperature compensation (24 V) | -32 mV/°C |
| Temperature compensation (48 V) | -64 mV/°C |
| Maximum efficiency | 99 % |
| Self-consumption | Less than 35mA @ 12V / 20mA @ 48V |
| Maximum PV open-circuit voltage | 250 V |
| PV start-up voltage | The PV voltage must exceed Vbat + 5V for the controller to start. After that, the minimum PV voltage is Vbat + 1V |
| Number of MPPT trackers | 1 |
| Maximum PV short-circuit current | 70 A |
| Low-voltage load disconnect | 11.1V / 22.2V or 11.8V / 23.6V or BatteryLife algorithm |
| Load reconnect after low voltage | 13.1V / 26.2V / 52.4V or 14V / 28V / 56V or BatteryLife algorithm |
| Protections | Output short circuit, over-temperature, PV reverse polarity |
| Operating temperature range | -30 … 60 °C |
| Maximum humidity | 95 % |
| Maximum altitude | 5000 |
| Environmental conditions | Indoor, unconditioned |
| Pollution degree | PD3 |
| Data communication | VE.Direct, VE.Can |
| Remote on/off terminal | Yes |
| Programmable relay | DPST, AC ratings: 240VAC / 4A, DC ratings: 4A up to 35VDC, 1A up to 60VDC |
| Maximum number of units in synchronised parallel operation | 25 |
| Battery terminals | Screw terminals 35 mm² (2 AWG) |
| PV terminals | Screw terminals 35 mm² (2 AWG) |
| Remote on/off terminal connection | Two-pole screw terminal |
| Relay terminal connection | Three-pole screw terminal |
| Colour | Blue (RAL 5012) |
| Protection rating | IP22 (connection area), IP43 (electronic components) |
| Weight | 4.5 kg |
| Height | 216 mm |
| Width | 295 mm |
| Depth | 103 mm |
| Safety | CSA C22.2, EN-IEC 62109-1, UL 1741 |
| Data retention period | 46 d |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions