Cookie consent

We use cookies that the shop needs to work and, only with your consent, statistics and marketing cookies.

Learn more
  • -20%
Inverter/charger Victron Energy MultiPlus-II 48/8000/110-100
  • Inverter/charger Victron Energy MultiPlus-II 48/8000/110-100
  • Inverter/charger Victron Energy MultiPlus-II 48/8000/110-100
  • Inverter/charger Victron Energy MultiPlus-II 48/8000/110-100
  • Inverter/charger Victron Energy MultiPlus-II 48/8000/110-100

Inverter/charger Victron Energy MultiPlus-II 48/8000/110-100

€1,861 Save €373
€1,488 Tax included

€1,240 Tax excluded

The MultiPlus-II 48/8000/110-100 is an inverter/charger for 48 V batteries, with 8000 VA (6400 W) continuous power, 15000 W peak power, a maximum charge current of 110 A and a maximum efficiency of 95 %. The transfer switch is rated at 100 A, parallel operation is possible, and communication is via VE.Bus.

Reference PMP482805000

Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions

Your legal guarantee rights

Legal guarantee

EU harmonised notice on the legal guarantee of conformity

More information: europa.eu/youreurope/guarantees
Open the notice at full size

MultiPlus-II 48/8000/110-100 - 48 V inverter/charger, 8000 VA

MultiPlus-II 48/8000/110-100 is a multifunctional inverter/charger for 48 V batteries, with 8000 VA (6400 W) continuous power, 15000 W peak power and a maximum charge current of 110 A. It combines the functions of the MultiPlus and the MultiGrid, with a 100 A transfer switch.

Key features:

  • Continuous power: 8000 VA (6400 W)
  • Peak power: 15000 W
  • Battery voltage: 48 V
  • Charge current: up to 110 A
  • Maximum efficiency: 95 %
  • Transfer switch: 100 A
  • Communication: VE.Bus

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid and is a multifunctional inverter/charger with two AC outputs. It is suited to professional marine and yachting systems, vehicles and off-grid land-based systems, and provides the isolation and redundancy required for ESS configurations.

PowerControl prevents overloading of the grid or generator, and PowerAssist boosts AC power during consumption peaks. In the event of a power cut, the inverter switches over within milliseconds, keeping computers and sensitive electronic equipment running. The charger combines speed with efficiency through an intelligent adaptive algorithm that extends battery life, and the product supports parallel and three-phase configurations.

Technical specifications

Nominal battery voltage48 V
PowerControlYes
PowerAssistYes
Parallel operationYes
Three-phase operationYes
Number of AC inputs1
Transfer switch rated current100 A
Maximum AC input current100 A
DC input voltage range38 … 66 VDC
AC output voltage230 VAC
AC output frequency50 Hz
Continuous output power at 25 °C (VA)8000 VA
Continuous output power at 25 °C (W)6400 W
Continuous output power at 40 °C5500 W
Continuous output power at 65 °C4000 W
Peak power15000 W
Maximum injected apparent power8000 VA
Maximum efficiency95 %
No-load consumption29 W
No-load consumption in AES mode19 W
No-load consumption in search mode3 W
AC input voltage range187 … 265 VAC
AC input frequency range45 … 65 Hz
Charge voltage in absorption57.6 VDC
Float charge voltage55.2 VDC
Charge voltage in storage mode52.8 VDC
Charging algorithmAdaptive, 4-stage
Maximum battery charge current110 A
Temperature sensorIncluded
Number of AC outputs2
Auxiliary outputYes
External AC current sensor50A or 100A (optional)
Programmable relayAC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC
ProtectionsOutput short circuit, Overload, High battery voltage, Low battery voltage, Over-temperature, AC voltage on the inverter output, Excessive DC ripple
Communication portVE.Bus
General-purpose communication portYes
Remote control terminalOn / Off / Charger only
Programmable via computerYes
Operating temperature range-40 … 65 °C
Fan-assisted coolingYes
Maximum humidity95 %
Maximum altitude2000 m
AC connection terminalsM6 bolts
Battery connection terminalsM8 bolts (two for the positive connection and two for the negative)
Remote terminal typeTwo-pole screw terminal
Relay terminalThree-pole screw terminal
VE.Bus terminal typeTwo RJ45 terminals
MaterialSteel
ColourBlue (RAL 5012)
Protection ratingIP22
Weight42 kg
Height642 mm
Width363 mm
Depth206 mm
SafetyEN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission and immunityEN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
Anti-islanding standardPlease see the certificates on our website
UPS standardPlease see the certificates on our website

Data sheet

Reference
PMP482805000
Brand
Victron Energy
Product type
Inverter/charger
Inverter type
Inverter/charger
Off-grid (no grid)
Phases
Single-phase
Power class
6-10 kW
Continuous output power (VA, 25 °C)
8000 VA
Continuous output power (W, 25 °C)
6400 W
Peak power
15000 W
Maximum efficiency
95 %
Zero-load power
29 W
Output waveform
Pure sine wave
Battery voltage
48 V
DC input voltage range
38-66 V
Max. charge current
110 A
AC output voltage
230 V
Output frequency
50 Hz
AC input voltage range
187-265 V
Max. AC input current
100 A
Parallel operation
Only with an external AC transfer switch
Communication interfaces
VE.Bus
Programmable relay
Yes
Protections
Output short-circuit, overload, overtemperature, high battery voltage, low battery voltage, excessive DC ripple, AC voltage on output
Dimensions (H x W x D)
642 x 363 x 206 mm
Weight
42 kg
Ingress protection (IP)
IP22
Operating temperature
-40 ... 65 °C
Max. relative humidity
95 %
Colour
Blue
Material
Steel
Standards and compliance
EN-IEC 60335-1, EN 55014-1, EN 55014-2, EN-IEC 61000-3-2

We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.

Compatibility

Other compatible products

Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions

Other products in the same category