€1,356 Tax excluded
The Victron Phoenix Inverter 24/5000 Smart is a sine-wave inverter for 24 V batteries, with a continuous power of 5000 VA (4000 W) at 25 °C, a peak power of 10000 W and a maximum efficiency of 95%. It has built-in Bluetooth, a VE.Direct port, a programmable relay and a full metal housing.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
Victron Phoenix Inverter 24/5000 Smart is a sine-wave inverter with a full metal housing, with a continuous power of 5000 VA (4000 W) at 25 °C, for 24 V batteries, with built-in Bluetooth and a VE.Direct port. It is configured with VictronConnect.
The Phoenix Inverter Smart is built on the Phoenix inverter platform, with proven, field-tested reliability, and has a full metal housing. The full-bridge topology plus toroidal transformer has proven its reliability over the years; the inverter is short-circuit proof and protected against overheating caused by overload or high ambient temperature.
The built-in Bluetooth allows full configuration with a smartphone or tablet via VictronConnect: low battery voltage alarm, shutdown and restart levels, dynamic cut-off (load-dependent shutdown level), output voltage 210-245 V, frequency 50 Hz or 60 Hz, ECO mode activation and the alarm relay. The VE.Direct port can be connected to a computer (a VE.Direct to USB interface cable is required) for configuration and monitoring.
The high start-up power makes it possible to supply power converters for LED lamps, halogen lamps or power tools. In ECO mode, the inverter goes into standby when the load drops below a preset value and switches on for a short period every 2.5 seconds (adjustable). A remote on/off switch or a relay contact can be connected to the two-pin connector. To transfer the load to another AC source, the Filax automatic transfer switch (switching time under 20 milliseconds) or a MultiPlus with a built-in transfer switch is recommended.
| Product code | PIN242500000 |
|---|---|
| Product type | Inverter |
| Inverter type | Inverter (without charger) |
| Phases | Single-phase |
| Power class | 3.5-6 kW |
| Continuous output power (VA, 25 °C) | 5000 VA |
| Continuous output power (W, 25 °C) | 4000 W |
| Peak power | 10000 W |
| Maximum efficiency | 95% |
| No-load consumption | 18 W |
| Output waveform | Pure sine wave |
| Battery voltage | 24 V |
| DC input voltage range | 18.6-34 V |
| AC output voltage | 230 V |
| Output frequency | 50/60 Hz |
| Parallel operation | No |
| Communication interfaces | VE.Direct, Bluetooth |
| Programmable relay | Yes |
| Protections | Output short circuit, overload, excessive temperature, battery voltage too high, battery voltage too low, excessive DC ripple, AC voltage at the output |
| Dimensions (height x width x depth) | 595 x 295 x 160 mm |
| Weight | 29 kg |
| Protection rating (IP) | IP21 |
| Operating temperature | -40 ... 65 °C |
| Maximum relative humidity | 95% |
| Colour | Blue and black |
| Material | Steel |
| Standards and compliance | EN 60335-1, ECE R10-5, EN 55014-1, EN 55014-2 |
| Adjustable output voltage range | 210-245 V |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions
