€1,453 Tax excluded
The Fronius Primo Primo6.0-1 is a single-phase, transformerless, grid-tied inverter with a continuous power of 6 kW (6000 VA). It has 2 MPPTs, a maximum PV voltage of 1000 V, an IP65 protection rating and Wi-Fi, Ethernet, USB, RS485, Modbus communication; the operating temperature is -40 to 55 °C.
Fronius Primo Primo6.0-1 is a single-phase, transformerless, grid-tied inverter (without battery) with a continuous power of 6 kW. It has 2 MPPTs, a maximum PV input voltage of 1000 V and an IP65 protection rating, with an AC voltage of 220/230 V and Wi-Fi, Ethernet, USB, RS485, Modbus communication.
Fronius Primo is part of the SnapINverter generation of single-phase transformerless inverters for residential consumers, with power classes between 3.0 and 8.2 kW. The SuperFlex design offers flexibility in system design, and the SnapINverter mounting system makes installation and maintenance easier.
| Product code | Primo6.0-1 |
|---|---|
| Product type | Inverter |
| Inverter type | Grid-tied (without battery) |
| Phases | Single-phase |
| Power class | 3.5-6 kW |
| Continuous output power (VA, 25 °C) | 6000 VA |
| Continuous output power (W, 25 °C) | 6000 W |
| Output waveform | Pure sine wave |
| Battery voltage | No battery |
| DC input voltage range | 80-1000 V |
| Maximum panel input voltage | 1000 V |
| Number of MPPTs | 2 |
| AC output voltage | 220/230 V |
| Output frequency | 50/60 Hz |
| Communication interfaces | Wi-Fi, Ethernet, USB, RS485, Modbus |
| Protections | Reverse polarity of the panels |
| Dimensions (height x width x depth) | 645 x 431 x 204 mm |
| Weight | 21.5 kg |
| Protection rating (IP) | IP65 |
| Operating temperature | -40 ... 55 °C |
| Maximum relative humidity | 100 % |
| Standards and compliance | IEC 62109-1/-2, IEC 62116, IEC 61727 |
| Total harmonic distortion | < 5 % |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions