- -20%
€540 Tax excluded
The Phoenix Compact 12/2000 VE.Bus is a high-efficiency pure sine-wave inverter with SinusMax technology, designed for professional use. 12 V battery, continuous power 2000 VA (1600 W), peak power 4000 W, maximum efficiency 92%, VE.Bus port, parallel and three-phase operation.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
Phoenix Compact 12/2000 VE.Bus is a pure sine-wave inverter with a continuous power of 2000 VA (1600 W) at a battery voltage of 12 V. It uses SinusMax technology and is intended for professional use.
The design criteria focus on an inverter with a sine-wave output and optimum efficiency, with no compromise on performance. Thanks to HF hybrid technology, the product is compact, light and highly reliable. SinusMax technology allows starting at full load, so the inverter handles demanding loads well, such as cooling compressors or electric motors.
Up to 6 inverters can operate in parallel for a higher output power; three-phase operation is also possible. For an automatic transfer switch, the MultiPlus inverter/charger is recommended, with a transfer time of less than 20 milliseconds. Through the VE.Bus port and the MK3-USB interface, with VictronConnect or VEConfigure software, the output voltage and frequency, the over- and undervoltage thresholds and the programmable relay can be customised. The inverter can also be connected to a GX device (for example Cerbo GX) for monitoring and control.
| Nominal battery voltage | 12 V |
|---|---|
| DC input voltage range | 9.5 … 17 V |
| AC output voltage | 230 V |
| Frequency selection | 50Hz |
| Continuous output power at 25 °C (VA) | 2000 VA |
| Continuous output power at 25 °C (W) | 1600 W |
| Continuous output power at 40 °C | 1450 W |
| Continuous output power at 65 °C | 1000 W |
| Peak power | 4000 W |
| Maximum efficiency | 92% |
| No-load consumption | 9 W |
| No-load consumption in AES mode | 7 W |
| No-load consumption in search mode | 3 W |
| Programmable relay | AC ratings: 230V / 4A, DC ratings: 4A up to 35VDC and 1A up to 60VDC |
| Remote on/off terminal | Yes |
| Communication port | VE.Bus |
| Fully programmable | Yes |
| Parallel and three-phase operation | Yes |
| Protections | Output short circuit, overload, battery voltage too high, battery voltage too low, over-temperature, AC voltage at the inverter output, excessive DC ripple |
| Operating temperature range | -40 … 65 °C |
| Cooling | Yes |
| Maximum humidity | 95% |
| Battery connection | M8 screws |
| AC connection | Spring clamp |
| Remote control terminal | 2-pole screw terminal |
| Relay terminal | 3-pole screw terminal |
| Colour | Blue (RAL 5012) |
| Material | Aluminium |
| Protection rating | IP21 |
| Weight | 12 kg |
| Height | 520 mm |
| Width | 255 mm |
| Depth | 125 mm |
| Safety | EN-IEC 60335-1 |
| EMC | EN 55014-1, EN 55014-2 |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions