€216 Tax excluded
The Victron Phoenix Inverter 48/800 VE.Direct Schuko is a sine-wave inverter for 48 V batteries, with a continuous output power of 800 VA (650 W) at 25 °C, a peak power of 1500 W, a maximum efficiency of 91 % and a 230 V output. It has a VE.Direct port, remote on/off control and an ECO mode.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
Victron Phoenix Inverter 48/800 VE.Direct Schuko is a sine-wave inverter with a continuous output power of 800 VA (650 W) at 25 °C, for 48 V batteries and a 230 V output, with a VE.Direct port. It powers household appliances that need 230 V AC from leisure or vehicle batteries.
The VE.Direct port can be connected to a computer (a VE.Direct to USB interface cable is required) or to Apple and Android smartphones, tablets, MacBooks and other devices (a VE.Direct Bluetooth Smart dongle is required). The inverter is fully configurable: trigger and reset levels of the low battery voltage alarm, shutdown and restart levels, dynamic cut-off (load-dependent cut-off level), output voltage 210-245 V, ECO mode and detection level for ECO mode. Input and output voltage, load percentage and alarms are monitored.
The high starting power makes it possible to supply loads such as power supplies for LED lamps, halogen lamps or power tools. In ECO mode, the inverter switches to standby when the load falls below a preset value (minimum load 15 W) and switches on for a short time, by default every 2.5 seconds (adjustable); if the load exceeds the preset level, it stays on. A remote on/off switch can be connected to the two-pole connector, with no special tools needed for installation.
| Product code | PIN481800200 |
|---|---|
| Product type | Inverter |
| Inverter type | Inverter (without charger) |
| Phases | Single-phase |
| Power class | 0-1 kW |
| Continuous output power (VA, 25 °C) | 800 VA |
| Continuous output power (W, 25 °C) | 650 W |
| Peak power | 1500 W |
| Maximum efficiency | 91 % |
| No-load consumption | 9.5 W |
| Output waveform | Pure sine wave |
| Battery voltage | 48 V |
| DC input voltage range | 36.8-62 V |
| AC output voltage | 230 V |
| Output frequency | 50 Hz |
| Communication interfaces | VE.Direct |
| Protections | Output short circuit, overload, excessive temperature, battery voltage too high, battery voltage too low, excessive DC ripple |
| Dimensions (height x width x depth) | 105 x 216 x 305 mm |
| Weight | 5.5 kg |
| Protection rating (IP) | IP21 |
| Operating temperature | -40 ... 65 °C |
| Maximum relative humidity | 95 % |
| Colour | Blue |
| Material | Steel and plastic |
| Standards and compliance | EN-IEC 60335-1, ECE R10-4, EN 55014-1, EN 55014-2 |
| Adjustable output voltage range | 210-245 V |
| AC output socket | Schuko |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions
