€1,022 Tax excluded
The EasySolar-II 24/3000/70-32 MPPT 250/70 GX integrates a 3000 VA (2400 W) MultiPlus-II inverter/charger, a SmartSolar MPPT 250/70 solar charge controller and a GX device with a display. It has a maximum PV power of 2000 W, a maximum PV open-circuit voltage of 250 V, a solar charger efficiency of 99 % and a charge current of 70 A.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
EasySolar-II 24/3000/70-32 MPPT 250/70 GX is an all-in-one solar energy solution for 24 V batteries, integrating a 3000 VA MultiPlus-II inverter/charger, a SmartSolar MPPT 250/70 solar charge controller and a GX device with a 2 x 16 character display. The components come pre-wired in a single unit.
The solution integrates a MultiPlus-II inverter/charger, a SmartSolar MPPT 250/70 solar charge controller and a GX device with a 2 x 16 character display. The elements come pre-wired in a single unit, which simplifies most installations. The DC output of the SmartSolar MPPT is wired in parallel with the DC connection of the MultiPlus-II, and the MultiPlus-II on/off mechanism also controls the SmartSolar MPPT.
The display shows the parameters of the battery, the inverter and the solar charge controller. The same parameters can be accessed with a smartphone or another Wi-Fi-enabled device, and Wi-Fi can also be used to configure the system and change settings.
The integrated GX device includes a BMS-Can interface, which can be used to connect to a compatible battery managed over CAN-bus (it is not a VE.Can-compatible port), a USB port, an Ethernet port and a VE.Direct port. The system can be accessed through the Victron Remote Management (VRM) portal, through a separate GX Touch, through an MFD or, thanks to Bluetooth, through the VictronConnect app.
| Nominal battery voltage | 24 V |
|---|---|
| PowerControl | Yes |
| PowerAssist | Yes |
| Includes MPPT | Yes |
| Transfer switch rated current | 32 A |
| Maximum AC input current | 32 A |
| AC AUX output current | 32 A |
| DC input voltage range | 19 … 33 VDC |
| AC output voltage | 230 VAC |
| AC output frequency | 50 Hz |
| Continuous output power at 25 °C (VA) | 3000 VA |
| Continuous output power at 25 °C (W) | 2400 W |
| Continuous output power at 40 °C | 2200 W |
| Continuous output power at 65 °C | 1700 W |
| Peak power | 5500 W |
| Maximum injected apparent power | 3000 VA |
| Maximum efficiency | 94 % |
| No-load consumption | 13 W |
| No-load consumption in AES mode | 9 W |
| No-load consumption in search mode | 3 W |
| AC input voltage range | 187 … 265 VAC |
| AC input frequency range | 45 … 65 Hz |
| Charge voltage in absorption | 28.8 VDC |
| Float charge voltage | 27.6 VDC |
| Charge voltage in storage mode | 26.4 VDC |
| Charging algorithm | Adaptive, 4-stage |
| Maximum battery charge current | 70 A |
| Temperature sensor | Included |
| Solar charge controller model | MPPT 250/70-Tr |
| Maximum solar charger output current | 70 A |
| Maximum PV power | 2000 W |
| Maximum PV open-circuit voltage | 250 V |
| Maximum solar charger efficiency | 99 % |
| Self-consumption | 20 mA |
| Auxiliary output | Yes |
| External AC current sensor | 100A (optional) |
| Programmable relay | AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC |
| Protections | Output short circuit, Overload, High battery voltage, Low battery voltage, Over-temperature, AC voltage on the inverter output, Excessive DC ripple |
| Communication port | VE.Direct, VE.Bus, VE.Can, BMS-Can, WiFi, Ethernet |
| Remote control terminal | On / Off |
| Programmable via computer | Yes |
| Operating temperature range | -20 … 45 °C |
| Fan-assisted cooling | Yes |
| Maximum humidity | 95 % |
| Maximum altitude | 2000 m |
| AC connection terminals | Screw terminals 16 mm² (6 AWG) |
| Battery connection terminals | M8 bolts |
| PV connection terminals | M6 bolts |
| Remote terminal type | Two-pole screw terminal |
| Relay terminal | Three-pole screw terminal |
| VE.Bus terminal type | Two RJ45 terminals |
| Material | Aluminium |
| Colour | Blue (RAL 5012) |
| Protection rating | IP21 |
| Weight | 26 kg |
| Height | 499 mm |
| Width | 268 mm |
| Depth | 237 mm |
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 |
| Emission and immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3 |
| Anti-islanding standard | See our website |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions
