- New
- -20%
€1,045 Tax excluded
EasySolar-II 48/4k5/55-32 MPPT 250/70 GX is a system that combines an MPPT solar charge controller, an inverter/charger for 48 V batteries and a GX control hub in a single housing. It is easy to install with minimal cabling and is intended for self-consumption and residential storage, with 4000 W of continuous power and up to 4000 W of photovoltaic power.
Victron Energy commercial warranty: 5 years for defects in materials and workmanship, handled through us as the seller. In addition to the legal guarantee. Conditions
EasySolar-II 48/4k5/55-32 MPPT 250/70 GX is a system that combines an MPPT solar charge controller, an inverter/charger for 48 V batteries and a GX control hub in a single housing. It is easy to install with minimal cabling and is intended for self-consumption and residential storage, with 4000 W of continuous power and up to 4000 W of photovoltaic power.
The EasySolar-II GX combines an MPPT solar charge controller, an inverter/charger and a control platform in a single housing. The product is easy to install, with a minimum of cabling.
| Nominal battery voltage | 48 V |
|---|---|
| PowerControl | Yes |
| PowerAssist | Yes |
| Includes MPPT | Yes |
| Number of AC inputs | 1 |
| Transfer switch rated current | 32 A |
| Maximum AC input current | 32 A |
| AUX AC output current | 32 A |
| DC input voltage range | 38 … 60 VDC |
| AC output voltage | 230 VAC |
| AC output frequency | 50 Hz |
| Continuous output power at 25 °C (W) | 4000 W |
| Continuous output power at 40 °C | 3700 W |
| Peak power | 7000 W |
| Maximum apparent power fed in | 4000 W |
| Maximum efficiency | 95 % |
| No-load consumption | 20 W |
| No-load consumption in AES mode | 12 W |
| No-load consumption in search mode | 7 W |
| AC input voltage range | 187 … 265 VAC |
| AC input frequency range | 45 … 65 Hz |
| Charge voltage in absorption | 57.6 VDC |
| Float charge voltage | 55.2 VDC |
| Storage mode charge voltage | 52.8 VDC |
| Charging algorithm | Adaptive, 4-stage |
| Maximum battery charge current | 55 A |
| Starter battery charging current | 50 A |
| Solar charge controller model | MPPT 250/70-Tr |
| Maximum solar charger output current | 70 A |
| Maximum PV power | 4000 W |
| Maximum PV open-circuit voltage | 250 V |
| Maximum solar charger efficiency | 99 % |
| Self-consumption | 20 mA |
| Absorption charge voltage (solar) | 57.6 VDC |
| Float charge voltage (solar) | 55.2 VDC |
| Auxiliary output | Yes |
| Number of AC outputs | 2 |
| External AC current sensor | 100 A (optional) |
| Programmable relay | AC ratings: 230 V / 4 A, DC ratings: 4 A up to 35 VDC and 1 A up to 60 VDC |
| Protections | Output short circuit, Overload, High battery voltage, Low battery voltage, Over-temperature, AC voltage at inverter output, Excessive DC ripple |
| Communication port | BMS-Can, Ethernet, Wi-Fi, VE.Direct |
| Remote control terminal | On / Off |
| Programmable by computer | Yes |
| Operating temperature range | -20 … 65 °C |
| Fan-assisted cooling | Yes |
| Maximum humidity | 95 % |
| Maximum altitude | 2000 m |
| AC connection terminals | Screw terminals 16 mm² (6 AWG) |
| Battery connection terminals | M8 bolts |
| PV connection terminals | M6 bolts |
| Remote terminal type | Two-pole screw terminal |
| Relay terminal | Three-pole screw terminal |
| VE.Bus terminal type | Two RJ45 terminals |
| Material | Steel |
| Colour | Blue (RAL 5012) |
| Ingress protection | IP21 |
| Weight | 27 kg |
| Height | 591 mm |
| Width | 275 mm |
| Depth | 254 mm |
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 |
| Emission and immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3 |
| Anti-islanding standard | Please refer to our website |
We took these technical data from the manufacturer’s datasheet; transcription errors are possible. For 100% accuracy, please consult the attached datasheet.
Compatibility is calculated automatically from the manufacturers’ technical data and is for information only. For complex systems, we recommend having the configuration checked by a consultant before ordering. Details in the Terms and conditions