Orion-Tr 24/12-15 (180W) is a non-isolated DC-DC converter that powers 12 V loads from 24 V systems, with a 12.5 V output and 15 A continuous current. Synchronous rectification keeps full-load efficiency above 95 %, and the screw terminals allow installation without special tools.

Orion-Tr 24/12-15 (180W) is a non-isolated DC-DC converter that powers 12 V loads from 24 V systems, with a 12.5 V output and 15 A continuous current. Synchronous rectification keeps full-load efficiency above 95 %, and the screw terminals allow installation without special tools.

Orion-Tr 24/12-9A (110W) is a galvanically isolated DC-DC converter that powers 12 V loads from a 24 V source, with output voltage adjustable between 10 and 15 V. It is short-circuit proof, an unlimited number of units can be paralleled to increase output current, and the remote on/off input removes the need for a high-current switch.

Orion-Tr 24/12-10 (120W) is a non-isolated DC-DC converter that powers 12 V loads from 24 V systems, with a 12.5 V output and 10 A continuous current. Synchronous rectification keeps full-load efficiency above 95 %, and the screw terminals allow installation without special tools.

Orion XS 12/12-70A is a DC-DC battery charger for dual battery systems charged by an alternator, including intelligent alternators. Input and output currents are configurable up to 70 A, aluminium circuit board cooling delivers 98 % efficiency without fans, and full output is available up to 40 °C.

Orion-Tr 24/12-5 (60W) is a non-isolated DC-DC converter that powers 12 V loads from 24 V systems, with a 12.7 V output and 5 A continuous current. Synchronous rectification keeps full-load efficiency above 95 %, and the screw terminals allow installation without special tools.

Orion-Tr 24/12-5 (60W) is a non-isolated DC-DC converter that powers 12 V loads from 24 V systems, with a 12.7 V output and 5 A continuous current. Synchronous rectification keeps full-load efficiency above 95 %, and the screw terminals allow installation without special tools.

Orion-Tr 12/48-8A (380W) is a galvanically isolated DC-DC converter that powers 48 V loads from a 12 V system. It is short-circuit proof, an unlimited number of units can be paralleled to increase output current, and the remote on/off input can be operated with a low-power switch or the engine run/stop switch.

Orion IP67 12/24-50A (1200W) is a non-isolated, waterproof DC-DC converter that converts 12 V to 24 V at 50 A. Its IP67 aluminium housing, vibration resistance and operating range from -40 to 70 °C make it suitable for installation in locations exposed to moisture, dust and vibration.

Orion 12/24-10 IP20 is a non-isolated DC-DC converter that converts 12 V to 24 V, with output adjustable between 20 and 30 V and a current of 10 A. Thanks to the adjustable output it can also be used as a battery charger, and up to five units can be paralleled to increase the available current.

Orion-Tr 12/12-9A (110W) is a galvanically isolated DC-DC converter that powers 12 V loads from a 12 V source, with output voltage adjustable between 10 and 15 V. It is short-circuit proof, an unlimited number of units can be paralleled to increase output current, and the remote on/off input removes the need for a high-current switch.

Orion 12/24-8 IP20 is a non-isolated DC-DC converter that steps a 12 V battery supply up to a 24 V output at 8 A continuous, for powering 24 V equipment in a 12 V system. The remote on/off connector allows switching with a low-power switch or the engine run/stop switch.

Orion 110/24-15A (360W) is a galvanically isolated DC-DC converter that turns a 110 V DC input, within a 60-140 V range, into a stable 24 V output at 360 W. It has built-in protection against short circuit, overheating, reverse polarity and overvoltage, with 400 V rms isolation between input and output.

Orion 110/12-30A (360W) is a galvanically isolated DC-DC converter that turns a 110 V DC input, within a 60-140 V range, into a stable 12.5 V output at 360 W. It has built-in protection against short circuit, overheating, reverse polarity and overvoltage, with 400 V rms isolation between input and output.

Orion-Tr 12/12-9A (110W) is a galvanically isolated DC-DC converter that powers 12 V loads from a 12 V source, with output voltage adjustable between 10 and 15 V. It is short-circuit proof, an unlimited number of units can be paralleled to increase output current, and the remote on/off input removes the need for a high-current switch.

Lynx Class-T Power In (M10) is a distribution module that connects and fuses up to two strings of lithium batteries. It features positive and negative busbars, connections for two Class-T fuses and a connection for grounding the DC system, and integrates with all other M10 Lynx products.

Lynx Shunt VE.Can (M10) is an intelligent 1,000 A shunt with a location for a fuse (not included), whose built-in battery monitor accurately tracks the state of charge. The data is read out through a GX device, such as the Cerbo GX, and the module is part of the modular Lynx distribution system.

The Isolation Transformer 4500W Auto 115/230V is designed for professional marine energy systems, where it prevents electrolytic corrosion and helps guarantee a safe electrical installation on shore power. Toroidal winding technology provides quiet operation and high efficiency, while soft-start circuitry prevents the shore breaker from tripping when plugged in.

Lynx Smart BMS 1000 NG (M10) is a Battery Management System for Victron Lithium NG batteries of 12.8 V, 25.6 V and 51.2 V. It integrates a 1,000 A contactor, a battery monitor and a pre-alarm signal, and manages up to 50 batteries in series and parallel in 12, 24 or 48 V systems.

The Isolation Transformer 2500W 115/230V is designed for professional marine energy systems, where it prevents electrolytic corrosion and helps guarantee a safe electrical installation on shore power. Toroidal winding technology provides quiet operation and high efficiency, while soft-start circuitry prevents the shore breaker from tripping when plugged in.