New products

Sun Inverter 24/250-10 IEC is a 24 V sine wave inverter with a built-in PWM solar charger in one easy-to-install enclosure. It delivers 200 W continuous and 400 W peak at 230 V AC, powering domestic equipment from 24 V batteries charged by solar panels. Parameters can be read via Bluetooth in VictronConnect, and a VE.Direct port allows connection to a GX device.

Skylla-i 24/100(1+1) 230V is a 24 V, 100 A battery charger with an adaptive 7-stage algorithm, BatterySafe mode against excessive gassing and Storage mode for periods of non-use. It has a main output and a 4 A starter battery output. It has a VE.Can (NMEA 2000) port, PowerControl to limit shore current, and is Li-ion (LiFePO4) ready.

Skylla-i 24/80(3) 230V is a 24 V, 80 A battery charger with an adaptive 7-stage algorithm, BatterySafe mode against excessive gassing and Storage mode for periods of non-use. It has three full-rated outputs for up to three battery banks. It has a VE.Can (NMEA 2000) port, PowerControl to limit shore current, and is Li-ion (LiFePO4) ready.

Sun Inverter 12/250-15 IEC is a 12 V sine wave inverter with a built-in PWM solar charger in one easy-to-install enclosure. It delivers 200 W continuous and 400 W peak at 230 V AC, powering domestic equipment from 12 V batteries charged by solar panels. Parameters can be read via Bluetooth in VictronConnect, and a VE.Direct port allows connection to a GX device.

Skylla-i 24/80(1+1) 230V is a 24 V, 80 A battery charger with an adaptive 7-stage algorithm, BatterySafe mode against excessive gassing and Storage mode for periods of non-use. It has a main output and a 4 A starter battery output. It has a VE.Can (NMEA 2000) port, PowerControl to limit shore current, and is Li-ion (LiFePO4) ready.

Shunt 6000A/50mV-0,5 / 5xM10 is a measuring shunt for very high-current DC systems, rated for 6000 A with a 50 mV voltage drop. It has five M10 terminals for connection.

Shunt 1000A/50mV-0,5 / 2xM10 is a shunt for accurate current measurement in high-power DC systems. It has a 50 mV voltage drop at 1000 A and two M10 terminals.

Shunt 500A/50mV is a current measuring shunt for DC systems, with a 50 mV voltage drop at its 500 A rated current. It has M10 terminals and belongs to the Victron 500-6000 A shunt range.

SmartShunt 2000A is a battery monitor without a display for high-current DC systems, with a 2000 A shunt and M10 terminals. State of charge, time to go and history are read via Bluetooth in VictronConnect or on a GX device connected via VE.Direct. The auxiliary input monitors a second battery, the midpoint or temperature.

Battery Box for SHS 200 is a battery enclosure designed for the SHS 200, part of the Victron Solar Home System range. It complements the SHS 200 MPPT unit and the solar cable, which are ordered separately.

SHS 200 MPPT v3.0 MC4 is the MPPT unit of the SHS 200, part of the Victron Solar Home System range, in the 12 V version (v3.0) with MC4 connectors. It is combined with the other SHS 200 components, such as the battery box and the solar cable, which are ordered separately, to build a solar home system.

Adapter Cord 16A/250V - CEE Plug/Schuko Coupling allows an appliance with a Schuko plug to be supplied from a CEE outlet, for example on a pontoon or at a campsite.

Shore Power Cord 25m 32A/250Vac (3x6mm²) is a 25 m shore power cable for connecting a boat or vehicle to the grid. It has a moulded IEC 60309 plug and connector, IP56 protection and a power indication LED.

Adapter Cord 32A Three-Phase to Single-Phase - CEE Plug 5P/CEE Coupling 3P provides a single-phase supply from a 32 A three-phase 5-pin CEE outlet through a 3-pin CEE coupling.

Adapter Cord 16A to 32A/250V - CEE Plug 16A/CEE Coupling 32A allows a 32 A shore power cord to be connected to a 16 A CEE outlet at 250 V.

Shore Power Cord 25m 16A/250Vac (3x2,5mm²) is a 25 m shore power cable for connecting a boat or vehicle to the grid. It has a moulded IEC 60309 plug and connector, IP56 protection and a power indication LED.

Splitter Cord 16A/250V - CEE Plug/2x CEE Coupling splits one 16 A CEE outlet into two CEE couplings, so two loads or two shore power cords can be supplied from the same source.

Adapter Cord 16A/250V - Schuko Plug/CEE Coupling allows a shore power cord with a CEE connector to be plugged into a standard Schuko socket. It is useful in marinas or campsites without CEE outlets.

Shore Power Cord 15m 25A/250Vac (3x4mm²) is a 15 m shore power cable for connecting a boat or vehicle to the grid. It has a moulded IEC 60309 plug and connector, IP56 protection and a power indication LED.

Plug 32A/250Vac (2p/3w) for Power Inlet 32A is the mating connector for the Victron 32 A power inlet, used for the shore power connection. It has a two-pole plus earth configuration, rated 32 A at 250 Vac.