SmartSolar MPPT 150/60-MC4 - MPPT solar charge controller with Bluetooth, 60A
SmartSolar MPPT 150/60-MC4 is an MPPT solar charge controller with built-in Bluetooth for 12, 24 or 48V batteries that maximises solar energy harvest. It can even recharge a battery depleted down to 0 V, provided the cells are not damaged, and the panels connect via two pairs of MC4 connectors. Maximum efficiency exceeds 98%, with no cooling fan.
Main features:
- Max. PV voltage: 150 V
- Charge current: 60 A
- Battery voltage: 12 / 24 / 48 V auto, 36 V via software
- PV connection: 2 pairs of MC4 connectors, 30 A max. each
- Connectivity: Bluetooth, VE.Direct, programmable relay, remote on/off
- Parallel operation: up to 10 units synchronised via Bluetooth
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Technical specifications
| Battery voltage (auto select) | 12V / 24V / 48V Auto Select (software tool needed to select 36V) |
|---|
| Rated charge current | 60 A |
|---|
| Nominal PV power (12 V) | 860 W |
|---|
| Nominal PV power (24 V) | 1720 W |
|---|
| Nominal PV power (36 V) | 2580 W |
|---|
| Nominal PV power (48 V) | 3440 W |
|---|
| Absorption charge voltage | 14.4V / 28.8V / 57.6V (adjustable) |
|---|
| Float charge voltage | 13.8V / 27.6V / 55.2V (adjustable) |
|---|
| Charge algorithm | Multi-stage adaptive (adjustable) |
|---|
| Temperature sensor | Internal |
|---|
| Temperature compensation (12 V) | -16 mV/°C |
|---|
| Temperature compensation (24 V) | -32 mV/°C |
|---|
| Temperature compensation (48 V) | -64 mV/°C |
|---|
| Maximum efficiency | 98 % |
|---|
| Self-consumption | Less than 35mA @ 12V / 20mA @ 48V |
|---|
| Maximum PV open-circuit voltage | 150 V |
|---|
| PV start-up voltage | The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1V |
|---|
| Number of MPPT trackers | 1 |
|---|
| Maximum PV current per MC4 connector | 30 A |
|---|
| Maximum PV short-circuit current | 50 A |
|---|
| Protections | PV reverse polarity, Output short-circuit, Excessive temperature |
|---|
| Operating temperature range | -30 … 60 °C |
|---|
| Maximum humidity | 95 % |
|---|
| Maximum altitude | 5000 |
|---|
| Environmental conditions | Indoor, unconditioned |
|---|
| Pollution degree | PD3 |
|---|
| Bluetooth | Yes |
|---|
| Data communication | Bluetooth, VE.Direct |
|---|
| Remote on/off terminal | Yes |
|---|
| Programmable relay | DPST AC rating: 240VAC / 4A, DC rating: 4A up to 35VDC, 1A up to 60VDC |
|---|
| Maximum units in synchronised parallel operation (Bluetooth) | 10 |
|---|
| Battery connection terminals | Screw terminals 35 mm² (2 AWG) |
|---|
| PV connection terminals | MC4 connectors (two pairs) |
|---|
| Remote on/off terminal connection | Screw terminal two pole |
|---|
| Relay terminal connection | Screw terminal 3-pole |
|---|
| Colour | Blue (RAL 5012) |
|---|
| Protection category | IP22 (connection area), IP43 (electronic components) |
|---|
| Weight | 3 kg |
|---|
| Height | 215 mm |
|---|
| Width | 250 mm |
|---|
| Depth | 95 mm |
|---|
| Safety | EN-IEC 62109-1, UL 1741, CSA C22.2 |
|---|
| Data retention period | 46 d |
|---|
| Stored data | Battery voltage, Battery current, Battery temperature, PV voltage, PV current, Load output Current |
|---|
English
Français
