Wall mounted enclosure for Color Control GX and BMV or MPPT is an accessory that holds a Color Control GX together with a BMV battery monitor or an MPPT Control, so both units can be installed on a wall.

AGM Deep Cycle 6V/240Ah is a sealed lead-acid (VRLA) battery with AGM technology and very low internal resistance, suited to high-current discharges such as inverters, thrusters and winches. As a 6 V, 240 Ah block it is connected in series to build 12, 24 or 48 V banks for off-grid systems and boats. Low self-discharge allows long periods without charging.

AGM Super Cycle 12V/25Ah (M5) is an AGM battery designed for applications with frequent deep discharges. Improved electrochemistry makes it resistant to sulfation and plate softening even after repeated 100% discharges, with tests showing at least 300 full cycles. With 25 Ah it suits small mobile systems, small boats and off-grid applications.

Zigbee to RS485 converter (DRF2659C, DTK) is a module that, together with the Zigbee to USB converter, forms a wireless link between an energy meter and a GX device.

AGM Deep Cycle 12V/22Ah is a sealed lead-acid (VRLA) battery with AGM technology and very low internal resistance, suited to high-current discharges such as inverters, thrusters and winches. Its 22 Ah capacity suits small loads, backup systems and portable applications. Self-discharge below 2% per month at 20 °C allows long periods without charging.

AGM Deep Cycle 12V/14Ah is a sealed lead-acid (VRLA) battery with AGM technology and very low internal resistance, suited to high-current discharges such as inverters, thrusters and winches. Its 14 Ah capacity suits small loads, backup systems and portable applications. Self-discharge below 2% per month at 20 °C allows long periods without charging.

Zigbee to USB converter (DRF2658C, DTK) is a module that, paired with the Zigbee to RS485 converter, connects an energy meter wirelessly to a GX device, without a data cable between them.

Orion-Tr Isolated DC-DC Charger remote cable is an accessory for applications where the remote on/off signal is referenced to the secondary battery, for example a lithium battery with a BMS.

Pre-charge cable is an accessory that pre-charges the internal capacitors of an inverter, inverter/charger or MPPT via the DC terminals before the battery is connected, so that connecting the battery does not cause arcing.

Cable for Smart BMS CL 12-100 to MultiPlus is a connection cable between the Smart BMS CL 12-100 battery management system and a MultiPlus inverter/charger, in 12 V systems with Victron LiFePO4 Smart batteries.

USB extension cable 0.3 m one side right angle is an accessory for USB connections inside the Color Control GX wall mount box, where some USB plugs are too long to fit.

Wall mounted enclosure for BMV or MPPT Control is an accessory for easily mounting a BMV-700 series battery monitor or an MPPT Control panel on a wall.

Wall mounted enclosure for Color Control GX is an accessory designed to hold a Victron Color Control GX, so that the unit can be installed on a wall surface.

M8 circular connector Male/Female 3 pole cable 2 m is an extension for BMS communication cables, supplied in a bag of 2. It works with Lithium Smart batteries and Smart BMS, or Lithium NG and NG BMS.

Wall mounted enclosure for 65 x 120 mm GX-panels is an accessory that allows a GX panel of this size to be installed directly on a wall in Victron monitoring systems.

Lithium NG Service Tool USB-C is an accessory with a USB-C connector from the Victron BMS accessory range. It is intended for service work on Lithium NG batteries with a built-in BMS, such as the Lithium SuperPack NG.

Lithium NG Service Tool USB-A is an accessory with a USB-A connector from the Victron BMS accessory range. It is intended for service work on Lithium NG batteries with a built-in BMS, such as the Lithium SuperPack NG.

VE.Can to CAN-bus BMS type A Cable 1.8 m is a cable for connecting a CAN-bus enabled battery from another manufacturer to a Victron system. The manual indicates whether type A or B is needed for each battery brand.

M8 circular connector Male/Female 3 pole cable 1 m is an extension for BMS communication cables, supplied in a bag of 2. It works with Lithium Smart batteries and Smart BMS, or Lithium NG and NG BMS.

VE.Can Power Cable is a cable that supplies power to the CAN bus. It is needed when the VE.Can network is not powered by a Skylla-i charger or an MPPT.