GX PRODUCTS

GX LTE 4G-SA is a 2G/3G/4G cellular modem for GX devices, giving the system a mobile internet connection and access to the VRM Portal. Its built-in GPS receiver, combined with the optional GPS antenna, allows the installation to be tracked and geo-fenced in VRM. The right variant depends on the local network bands, as described in the manual.

The Outdoor 2G and 3G GSM Antenna is an accessory for the GX GSM cellular modem, which gives GX devices mobile internet and a connection to the VRM Portal. Many operators are shutting down their 3G networks.

The Active GPS Antenna is an optional accessory for the GX GSM and GX LTE 4G modems, which have a built-in GPS receiver. With the antenna installed, the system can be tracked and geo-fenced on the VRM Portal.

GX LTE 4G-A is a cellular modem for the GX range of monitoring products, providing the system with a mobile internet connection and access to the VRM Portal. It works on 2G, 3G and 4G networks and includes a built-in GPS receiver. Several models exist, chosen according to the cellular bands available locally.

The 100A:50mA current transformer with 5 m cable and wire ends is an accessory for the MultiPlus-II and MultiGrid-II. Through external current sensing it enables PowerControl and PowerAssist and optimised self-consumption.

The 100A:50mA current transformer with 20 m cable and wire ends is an accessory for the MultiPlus-II and MultiGrid-II. Through external current sensing it enables PowerControl and PowerAssist and optimised self-consumption.

The 400A:50mA current transformer with 10 m cable and wire ends is an accessory for the MultiPlus-II and MultiGrid-II. Through external current sensing it enables PowerControl and PowerAssist and optimised self-consumption.

The 100A:50mA current transformer with 1 m cable and wire ends is an accessory for the MultiPlus-II and MultiGrid-II. Through external current sensing it enables PowerControl and PowerAssist and optimised self-consumption.

The single-phase AC Current Sensor, max. 40 A, is an external sensor that measures current, power (VA) and energy of a PV inverter connected to the AC input or output of a Multi or Quattro, displayed via the Color Control and on VRM.

GX Touch 70 flush mount is a 7-inch touch screen display for the Cerbo GX that shows the system status at a glance and allows settings to be adjusted quickly. It has a super slim waterproof design, connects with a single cable and installs simply into a dashboard.

The Ekrano GX Wall Mount is an accessory for installing the Ekrano GX on a solid wall with only four screws and no cut-outs. The enclosure opens from the top and folds forward for easy cable access.

Nucleo GX is a compact GX device with a quad-core processor, offering Ekrano GX-level speed at a lower cost. It connects up to 25 devices via VE.Direct and USB, plus more via VE.Can, and monitors battery status, consumption and PV, generator or mains input in real time. It suits ESS and off-grid installations built around the Multi RS.

Battery Alarm GX is a compact alarm panel that monitors the battery bank and signals threshold violations with audible and visual alarms. It provides a potential-free contact with normally open and normally closed outputs, and the alarm thresholds and hysteresis are set with DIP switches.

Wall mounted enclosure for Color Control GX and BMV or MPPT is an accessory that holds a Color Control GX together with a BMV battery monitor or an MPPT Control, so both units can be installed on a wall.

Zigbee to RS485 converter (DRF2659C, DTK) is a module that, together with the Zigbee to USB converter, forms a wireless link between an energy meter and a GX device.

Zigbee to USB converter (DRF2658C, DTK) is a module that, paired with the Zigbee to RS485 converter, connects an energy meter wirelessly to a GX device, without a data cable between them.

Wall mounted enclosure for Color Control GX is an accessory designed to hold a Victron Color Control GX, so that the unit can be installed on a wall surface.

Wall mounted enclosure for 65 x 120 mm GX-panels is an accessory that allows a GX panel of this size to be installed directly on a wall in Victron monitoring systems.

GlobalLink 520 is a remote monitoring device with an LTE-M modem that provides plug-and-play connectivity to the VRM portal for Victron products with a VE.Direct port. It is intended for off-grid systems on the road or at sea and includes five years of connectivity without monthly fees or subscriptions, with the option to extend.

GlobalLink 530 is a remote monitoring device fitted with a 4G modem with 2G fallback, providing reliable coverage in many parts of the world. It offers plug-and-play connectivity to the VRM portal for Victron VE.Direct devices, with no monthly fees or subscriptions for five years and the option to extend afterwards.